ເອກະສານຄັດຕິດລົດກະບະ Push Pull

ເຮືອນ / ເອກະສານຄັດຕິດທັງ ໝົດ / ເອກະສານຄັດຕິດລົດກະບະ Push Pull

ເອກະສານຄັດຕິດລົດກະບະ Push Pull
A push-pull forklift attachment is a material handling device designed to move long and heavy loads with ease. It is attached to the forklift and helps in pushing and pulling large and heavy loads, making the movement of goods from one place to another much easier. This attachment is especially useful for handling long and narrow loads such as pipes, steel beams, and sheets.

The push-pull attachment is made up of two arms that are attached to the forklift's tines. These arms can be extended to accommodate the length of the load being transported. The arms also have rollers on their ends that make it easier to move the load. The rollers can be adjusted to the desired height, making it possible to transport loads of different heights and sizes.

This attachment is easy to install and operate. It can be easily attached to the forklift and removed when not in use. The arms can be extended or retracted to accommodate the size of the load being transported. The attachment also comes with hydraulic control valves that make it possible to control the speed and direction of the load.

The push-pull forklift attachment is ideal for handling long and narrow loads such as pipes, steel beams, and sheets. It reduces the risk of damage to the load and the environment, as it allows for precise control over the movement of the load. The attachment also helps to increase productivity by reducing the amount of time and effort required to transport the load.

In conclusion, the push-pull forklift attachment is a useful tool for transporting long and heavy loads. It makes material handling easier, reduces the risk of damage to the load and the environment, and increases productivity. This attachment is a must-have for any company that handles long and narrow loads.

ຂໍ້ດີຂອງຜະລິດຕະພັນ


HUMAI forklift push/ pull forklift attachment with China Xinchai C490 engine, hydraulic transmission,USA EATON hydraulic assisted steering valve,SHIMADZU oil pump,full suspension chassis.It is widely used to handing all kinds of goods,such as pallet,steel,brick etc.Shantui has cooperated with KOMATSU more than 30 years,all the product was made under KOMATSU standard.

ວິດີໂອ


ເຄື່ອງຈັກ
ຕົວແບບ
HUAMAI C490
ຜົນໄດ້ຮັບທີ່ໃຫ້ຄະແນນ
40/2650
Kw / rpm
ປະເມີນຜົນ Torque
165/1800
N · m / rpm
ຖັງ No.of
4
ເບື່ອ×ເສັ້ນເລືອດຕັນໃນ
90 × 105
ມມ
ການຍ້າຍຖິ່ນຖານ
2.7
ຂະ ໜາດ
ຍົກສູງ
3000
ມມ
LxWxH (ດ້ວຍ / ບໍ່ມີສ້ອມ
3779 (2709) x1226x2140
ມມ
ປ່ຽນເປັນສີລັດສະ ໝີ
2450
ມມ
ມຸມອຽງຂອງແມ່ (F / R)
6/12
ປະລິນຍາ
ການປະຕິບັດ
ຄວາມໄວໃນການເດີນທາງ (ໂຫຼດເຕັມ / ບໍ່ມີການໂຫຼດ)
19/20
Km / h
ຄວາມໄວຍົກ (ໂດຍ / ບໍ່ມີ) ການໂຫຼດ
420/450
mm / ວິນາທີ
ຄວາມສາມາດ Max.gradeability
20
%
ນ້ ຳ ໜັກ ຕົວເອງ
4560
ກິ​ໂລກ​ຣາມ
ລໍ້ແລະຢາງລົດ
ແນວ ໜ້າ
28 × 9-15-14PR
ດ້ານຫລັງ
6.50-10-10PR
ລົດເຂັນ
1700
ມມ
ການເກັບກູ້ Min.ground (ອອກຫມາກ)
110
ມມ

ລາຍລະອຽດດ່ວນ


ເງື່ອນໄຂ: ໃໝ່
ສະຖານທີ່ຕົ້ນ ກຳ ເນີດ: ເມືອງ Xiamen, ຈີນ (ແຜ່ນດິນໃຫຍ່)
ຊື່ແບ: HUAMAI
ຈຳ ນວນຕົວແບບ: HUAMAI30
ປະເພດ: ລົດບັນທຸກຂົນສົ່ງໂດຍສະເພາະ
Power Souce: ເຄື່ອງຈັກກາຊວນ
ຄວາມສາມາດໃນການໂຫຼດທີ່ຖືກຈັດອັນດັບ: 3000kg
ສູງສຸດທີ່ເຄຍ. ຍົກສູງ: 8000mm
Min. ຍົກສູງ: 3000mm
ຄວາມຍາວຂອງສ້ອມ: 1070mm
ຄວາມຍາວຂອງສ້ອມ: 122mm
ຂະ ໜາດ ລວມ: 3829x1226x2140mm
ການຢັ້ງຢືນ: ISO9001 / ISO14001 / CE
ມີການບໍລິການຫລັງການຂາຍ: ວິສະວະກອນທີ່ມີໃຫ້ບໍລິການເຄື່ອງຈັກຢູ່ຕ່າງປະເທດ
Acceseeory: ຍູ້ / ດຶງ
ຂະ ໜາດ ຂອງສ້ອມ: 1070 * 122 * 40mm
ສູນໂຫຼດ: 500 ມມ
ຢາງລົດ: Pneumatic
ປະເພດພະລັງງານ: ກາຊວນ
ສີ: ສີເຫຼືອງ
ຖານລໍ້: 1700mm
ແບັດເຕີຣີ: 12V / 60Ah
ຄວາມສາມາດຖັງນໍ້າມັນ: 50 ລິດ
ຄວາມກົດດັນຂອງການເຮັດວຽກ: 17.5Mpa