2.2ton ທີ່ບໍ່ແມ່ນ SPressifting Fork Clamps ສຳ ລັບລົດຍົກ Forklift

ລາຍລະອຽດຂອງສິນຄ້າ

---

2.2ton Non-sideshifting Fork Clamps for forklift

ຄຳ ຮ້ອງສະ ໝັກ:

ເໝາະ ສຳ ລັບການຍຶດສິນຄ້າແລະຍັງສາມາດຈັດການກັບກະເປົາໄດ້.

ຄຸນ​ລັກ​ສະ​ນະ:

ການກໍ່ສ້າງທຸກຢ່າງທີ່ເຮັດດ້ວຍເຫຼັກແຂງ, ຕອບສະ ໜອງ ຄວາມຕ້ອງການໃນການ ດຳ ເນີນງານຢ່າງຕໍ່ເນື່ອງດ້ວຍປະສິດທິພາບສູງ.
ກອບແບບ E-Style-Slot ໃຫ້ສະຖຽນລະພາບທີ່ດີເລີດແລະມີອາຍຸການໃຊ້ງານຍາວນານ.
ການອອກແບບທີ່ສົມເຫດສົມຜົນກັບອົງປະກອບໄຮໂດຼລິກຄຸນນະພາບສູງສຸດທີ່ ໜ້າ ເຊື່ອຖືໄດ້.

ຊຸດຜະລິດຕະພັນ:
ບໍ່ແມ່ນທາງຍ່າງ
ການຜັນແປ
ໝຸນ

ຫມາຍ​ເຫດ​:
ສອງວົງຈອນໄຮໂດຼລິກເພີ່ມເຕີມທີ່ຕ້ອງການໃສ່ລົດບັນທຸກ, ສຳ ລັບການຍຶດແລະ ໝູນ ວຽນ ໜ້າ ທີ່.
ແຜ່ນຕິດຕໍ່ພິເສດສາມາດໃຊ້ໄດ້ຕາມ ຄຳ ຮ້ອງຂໍ.
ຜະລິດຕະພັນທັງ ໝົດ ທີ່ລະບຸຢູ່ຂ້າງເທິງແມ່ນຮູບແບບມາດຕະຖານ, ຜະລິດຕະພັນທີ່ສາມາດຕອບສະ ໜອງ ໄດ້ຕາມຄວາມຕ້ອງການລະອຽດ.

ສຳ ລັບ 2.5-3T Fork clamps-NonSsociationifting, pls ກັບໄປທີ່ "ໜ້າ ຕິດແນບລົດຍົກ" ກົດປຸ່ມ "ໜີບ ສ້ອມໂດຍບໍ່ມີການປ່ຽນຂ້າງ (2.5-3T)" ເພື່ອຊອກຫາຮູບແບບທີ່ຖືກຕ້ອງທີ່ທ່ານຕ້ອງການ.

ຫຼືທ່ານພຽງແຕ່ສາມາດຕິດຕໍ່ພວກເຮົາກັບຄວາມຕ້ອງການຜະລິດຕະພັນຂອງທ່ານ, ພວກເຮົາຈະ ນຳ ສະ ເໜີ ຮູບແບບທີ່ຕອບສະ ໜອງ ຄວາມຕ້ອງການຂອງທ່ານ. ຂໍຂອບໃຈສໍາລັບການເບິ່ງຂອງທ່ານ.

ໂດຍສະເພາະ

ສູນເກັບ ກຳ ຂໍ້ມູນຄວາມຈຸ @ (kg @ mm)	Modes	ຫ້ອງຕິດ	Range ເປີດ (ມມ)	ຄວາມຍາວຂອງແຂນ (ມມ)	ຄວາມກວ້າງຂອງກອບ (ມມ)	ລວງສູງ (ມມ)	ນໍ້າ ໜັກ (ກິ​ໂລກ​ຣາມ)	ຄວາມຫນາທີ່ມີປະສິດຕິຜົນ (ມມ)	ສູນກາງຂອງກາວິທັດຂອງກາວິທັດ (ມມ)
1100@600	CFS15D-001A	II	435-1555	915	865	620	250	175	163
1100@600	CFS15D-002A	II	435-1555	1065	865	620	259	175	191
1100@600	CFS15D-003A	II	435-1555	1220	865	620	268	175	226
1600@600	CFS20D-004A	II	410-1660	915	940	620	295	180	168
1600@600	CFS20D-005A	11	410-1660	1065	940	620	306	180	198
1600@600	CFS20D-006A	II	410-1660	1220	940	620	328	180	231
2300@600	CFS30D-001A	II	465-1810	915	1015	915	401	208	173
2300@600	CFS30D-001B	III	465-1810	915	1015	915	422	216	168
2300@600	CFS30D-002A	II	465-1810	1065	1015	915	420	208	203
2300@600	CFS30D-002B	III	465-1810	1065	1015	915	438	216	201
2300@600	CFS30D-003A	II	465-1810	1220	1015	915	435	208	226
2300@600	CFS30D-003B	III	465-1810	1220	1015	915	4	216	201

 

ຫມາຍ​ເຫດ​:

• ຮັບຄວາມອາດສາມາດຕົວຈິງຂອງລົດຍົກແລະເອກະສານຄັດຕິດຈາກຜູ້ຜະລິດລົດຍົກ.
• ສອງຊຸດວົງຈອນນ້ ຳ ມັນທີ່ ກຳ ນົດໄວ້ໃນລົດຍົກ.
• ແຂນເປີດສາມາດຖືກເພີ່ມໃສ່ເຄື່ອງຫຸ້ມຫໍ່ຂອງສ້ອມຕາມຄວາມຕ້ອງການ
• ໃຫ້ຄວາມຕ້ອງການຂອງສ້ອມແຕກຕ່າງກັນຕາມຄວາມຕ້ອງການ
• Please contact the sales from huamai.

 

ກະແສໄຟຟ້າແລະແຮງດັນ

 

ຕົວແບບ	ກະແສ Min.Hydraulic (L / min)	ລ. ກະແສໄຮໂດຼລິກ (L / ນາທີ)	ກະແສ Max.Hydraulic (L / min)	Min. ຄວາມກົດດັນຂອງໄຮໂດຼລິກ (ແຖບ)	ສູງສຸດທີ່ເຄຍ. ຄວາມກົດດັນຂອງໄຮໂດຼລິກ (ແຖບ)
CFS15D	15	25	25	35	160
CFS20D	15	25	25	35	160
CFS30D	15	40	40	35	160

 

Options

ຂະ ໜາດ ຂອງສ້ອມ

ມີຫຼາຍຊັ້ນຮຽນຕິດຕັ້ງ

ຊ່ວງເປີດຕາມໃຈລູກຄ້າ

MEDIA GALLERY

Package 

Reading Instruction

1. Product Model

Huamai model no. Consists of letters and numbers connected by “-”, the details as below:

RCF20F-002B

Name: Based on the product's functional and structural classification, an abbreviated product code is given

Example: RCF - Fixed short arm paper roll clamp

Capacity: Capacity= Code+00 (KGS)

Example: 20-2000 KGS

Series: The generations of the products

Example: D - The fourth generation

Clamp arm size: It is used to distinguish the same capacity, series and types of products with different structure sizes.

Example: 002 - The maximum diameter of paper roll is 1300mm

Mounting Class: The mounting class of the product

Example: B - III

2. Matching with Forklift

Please pay attention to the flow and pressure volume requirements for the attachments. Don’t exceed its maximum. Any special requirements such as pressure setting etc, other auxiliary devices may need to be added. Please contact our representatives for details.

3. Fitting Version

Fitting size is as per GB standard, with face seal type (M18 x 1.5). For special type please contact Huamai sales.

4. ຄວາມສາມາດ

The load capacity is only a parameter to measure the performance of structure, and the actual comprehensive carrying capacity also depends on the carrying cargo, working conditions and the capacity of forklift. Accurate forklift truck with comprehensive load capacity, please get it from the forklift factory.

5. ຫ້ອງຕິດ

The attachment is the mounting bracket of the product on the back of the product. Standard products carry these hooks and require forklift forks to meet international standards to properly mount the connection.

The meaning of installation is as follows:

Forks Carriage

	II		III		IV		V
Rated capacity of forklift (kg)	1000-2500		2501-4999		5000-8000		8001-10999
ໜ່ວຍ ງານ	ມມ	ມມ	ມມ	ມມ	ມມ	ມມ	ມມ	ມມ
b	407.00	16.02	508.00	20.00	635.00	25.00	728.00	28.66
h (maximum)	381.00	15.00	476.00	18.74	597.50	23.50	681.00	26.80
h (minimum)	380.00	14.96	474.50	19.68	595.00	23.50	678.00	26.70

 

6. Clamp arm& Forks Length

The clamp arm & fork length listed in this product manual is the effective length for the actual operation of clamp arm & fork.

7. ຮັບປະກັນ

Huamai  gives the warranty of new attachments 24 months from the date of delivery to first receiver or 4000 work hours according to the warranty policy listed in the products manuals.

Calculation of Comprehensive Net Capacity

The capacity is an important factor in the model selection for the forklift trucks and the attachments, the overall comprehensive capacity of the forklift truck and the attachment will decline when the forklift install with the attachments because of the below two factors:

• Part of the capacity moment may be offset by the moment of its self-weight.
• The load countermove forward because of effective thickness during the actual operation.

The formula below helps to calculate the net capacity. The ultimate value of capacity for reference only.

The counting parameters of forklift

Q: Rated capacity of forklift (kg) (Note: The rated capacity is relevant to the maximum height of lift)

X: The horizontal distance from the center of front wheel to the fork from face (mm)

C: The horizontal distance from the fork shank front face to the load center (mm)

S: The thickness of fork (mm)

The counting parameters of attachments

M: Attachment self-weight (kg)

A(A-X): The horizontal distance from center of front wheel to carriage front face (mm)

HGG: The horizontal distance from front face of carriage to horizontal center of gravity (mm)

ET: The horizontal distance from the carriage front face to the loaded back face (mm)

L: The horizontal distance from the loaded back face to the load center (mm)

Example:

Q= 2500kg   X= 450mm   C=500mm   S= 50mm

M=600kg   A= 400mm    HCG=300mm    ET=200mm

L=500mm

Comprehensive Net capacity (Residual capacity)

The minimum value got from the rated forklift truck load capacity, the attachment load capacity and the comprehensive net capacity as the actual capacity of the forklift trucks and the attachments as one, the weight of the carrying goods shall not exceed this allowable value.

* The accurate comprehensive load capacity value of the forklift truck and the attachments is getting from the forklift factory.

ຮັບປະກັນ

Thank you very much for purchasing Huamai attachments. In order to fully understand your rights as our customer, we recommend that you read the content of this warranty carefully.

The following: HM refers to Fujian Huamai Machinery Co., Ltd.; “Buyer” means a direct product purchaser and user.

Huamai Products

Huamai guarantee the products comply with contracts, quotations, relevant performance parameters of the requirements listed in the manual.

Warranty: Huamai new products.

New Products: Warranted for a period of 24 months following date of buyer receiving products, or 4000 working hours since date of installation whichever reaches the first.

Our promise to you

Huamai will repair or replace, at our option, any parts we deem to be defective in materials or workmanship, subject either to our own or Huamai authorized inspection.

Comprehensive net capacity

The calculation of the attachments comprehensive net capacity only for reference. The comprehensive net capacity of the forklift/attachment combination will be submitted by the original forklift manufacturer.

Buyer and User Attention

To preserve Huamai’s Warranty, Buyers and End Users must carefully follow the applicable User Manual when installing, adjusting, maintaining and operating Huamai equipment.

The buyer/end user must the obtain written authorization from Huamai for repairs, other than removal/replacement of defective parts.

Any unauthorized repairs or alterations, use of parts not provided by Huamai, or failure to following Huamai User Manual will result in loss of warranty.

Notice

Huamai does not warrant that its products will perform any particular task where conditions are not suitable for the product.

Huamai assumes no responsibility for loss, damage or injury to persons or property or for consequential damages, resulting from the possession or use of its products.

Huamai Warranty done not cover for general wear and tear, abnormal applications, normal or scheduled maintenance.

There are no warranties either expressed or implied including any warranty of fitness for a particular purpose which extend beyond those stated in this warranty and the product description on the face of Huami order acknowledgement.

Return/Rejection Policy

Please keep the attachments in unused condition. Please note that any actions must firstly adhere to the valid contract or additional agreement issued by Huamai.

Please submit the return permission. All costs and expenses caused are the sole responsibility of the buyer.

Where the following conditions apply, we will refuse returns.

• Be in used condition.
• Be not returned in original design.
• Special designed for customer.
• Special items mentioned in sales contract or additional agreement.

Thank you for choosing Huamai. If you have any requirements, please feel free to contact us.

FAQ:

1: What kind terms of payment can be accepted?
A: For terms of payment, normally L/C, T/T.

2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, etc.

3: What about the delivery time?
A: 1-15 days after receiving the deposit.

4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.

5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.

6. Can I have a sample order?

A: ແມ່ນແລ້ວ, ພວກເຮົາຍິນດີຕ້ອນຮັບ ຄຳ ສັ່ງຕົວຢ່າງເພື່ອທົດສອບແລະກວດສອບຕົວຢ່າງທີ່ມີຄຸນນະພາບ .Mixed ແມ່ນທີ່ຍອມຮັບໄດ້.

7. Can you accept mixed batch of different products?

A: ແມ່ນແລ້ວ, ພວກເຮົາສະ ໜັບ ສະ ໜູນ ຜະລິດຕະພັນຂາຍສົ່ງຜະລິດຕະພັນທີ່ແຕກຕ່າງກັນ.

8. Can you provide container packed in wooden cases if I order more products?

A : Yes,we are can provide a set of wooden packaging products.

9. We want to visit your company?

A: ບໍ່ມີບັນຫາຫຍັງ, ພວກເຮົາເປັນວິສາຫະກິດການຜະລິດແລະການປຸງແຕ່ງ, ຫວັງວ່າທ່ານຈະມາຮອດແລະພວກເຮົາຈະ ນຳ ທ່ານໄປຢ້ຽມຢາມໂຮງງານແລະໂຮງງານປຸງແຕ່ງຂອງພວກເຮົາ.